FAQs

Yes, AODD diaphragm pumps can cavitate under certain conditions. Cavitation occurs when the pressure in the pump falls below the vapor pressure of the liquid being pumped, causing vapor bubbles (or cavities) to form. These vapor bubbles are then carried into the higher-pressure regions of the pump, where they can collapse or implode, leading to noise, vibration, flow deficiency and potential damage to the pump components. Damage to AODD pumps is usually less severe and costly compared to other types of pumps, primarily affecting diaphragms with occasional issues involving valves or the pump body. However, cavitation in AODD pumps can significantly increase operational costs. Here are some common causes and preventive measures to avoid cavitation in AODD pumps: Common Causes of Cavitation in AODD Diaphragm Pumps Inadequate Net Positive Suction Head (NPSH): If the Net Positive Suction Head Available (NPSHa) is less than the Net Positive Suction Head Required (NPSHr) by the pump, cavitation can occur. NPSHr is provided by the pump manufacturer and should always be met or exceeded by the system's NPSHa. High Suction Lift: Excessive suction lift (the vertical distance between the pump and the fluid source) can reduce the pressure at the pump inlet, leading to cavitation. Long or Restrictive Suction Piping: Long suction lines, sharp angles, undersized piping or too many fittings and valves can create friction losses, reducing the pressure at the pump inlet. Suction pipe should always be the same size or larger than the pump’s suction port. Suction filters should be un-restricted and inspected periodically. High Fluid Temperature: Higher fluid temperatures increase the vapor pressure of the liquid, making it easier for cavitation to occur. Viscous or Entrained Solids: Pumping highly viscous fluids or fluids with entrained solids can increase the suction pressure requirements and lead to cavitation if not properly managed. Preventive Measures Ensure Adequate NPSH: Verify that the NPSHa in your system meets or exceeds the NPSHr specified by the pump manufacturer. This can involve checking the system design and [...]

Iwaki Air provides a range of industrial AODD pumps, available in various sizes and materials. Through extensive testing and critical analysis, Iwaki Air has made significant breakthroughs in AODD pump diaphragm technology, resulting in more durable products that can withstand harsh fluids such as oil, chemicals, and acids. Additionally, Iwaki Air has pioneered new hygienic, FDA-compliant diaphragms with enhanced flex life and durability, making them ideal for sanitary applications and providing substantial savings in labor and downtime. Over the years, a number of materials have been tested extensively for use in diaphragms in AODD pumps. These materials can be grouped into three primary families: Rubber, TPE (thermoplastic elastomer) and PTFE (Polytetrafluoroethylene or Teflon® ). Each family and the materials offer properties and attributes that make them suitable for different applications. What is the suction pressure for Air-Operated Pumps? The suction pressure of air-operated pumps may fluctuate based on factors, like the pump design, the pumped fluid type, and the application needs. Nonetheless there exist recommendations and usual ranges to consider: IwakiAir AODD pumps are able to suction lift up to 26.2’ when primed. Net Positive Suction Head Required (NPSHr): For proper operation, it is essential to ensure that the NPSHr of the pump is met. The NPSHr value is provided by the manufacturer and indicates the minimum pressure required at the suction port to avoid cavitation. This value varies based on the pump model and operating conditions. Elastomer Properties and Limitations ELASTOMER SELECTION GUIDE

AODD pumps assure leak-free and smooth fluid transfer in most applications where they are used. This makes them an ideal choice for applications where challenging fluids may be involved. The following are a few applications of Air-Operated Diaphragm Pumps Oil and Gas: Air-driven double diaphragm pumps are also known as double diaphragm pumps, used in the oil and gas industry for safe transfer of corrosive fluids without seals to prevent leaks and contamination. Mining: Portable and lightweight Air-operated pumps are utilized for mineral and ore extraction to handle high flow rates and prevent leaks. Their mobility allows easy site-to-site transport. Water and Wastewater Treatment: Air-operated diaphragm pumps are used extensively in water purification, chemical treatment, and sludge removal processes. Food and Beverage Processing: Our FDA compliant Air-operated Pumps are designed to maintain hygienic standards in food, beverage, and pharmaceutical industries, transferring fluids without altering taste or form and avoiding excessive mixing/shearing. Concrete Manufacturing: Air-operated diaphragm pumps are ideal for handling the highly abrasive materials common in concrete production. They ensure efficient mixing and transfer with minimum wear and tear, reducing maintenance costs and downtime. Chemical: These pumps are available in various materials, making them resistant to chemical corrosion and can handle a wide range of viscosities and temperatures. Their design prevents leaks and ensures the safe and efficient transfer of hazardous chemicals. Semiconductor: Air-operated diaphragm pumps are essential in the semiconductor industry due to their ability to handle ultra-pure chemicals without contamination. They maintain the integrity of the chemicals used in wafer fabrication and other processes, ensuring high-quality semiconductor products. Textiles and Carpet: Air-operated diaphragm pumps handle various viscosities and shear-sensitive fluids, ensuring consistent application of dyes and treatments without degradation. Their ability to transfer large volumes efficiently makes them ideal for large-scale textile and carpet manufacturing processes.

Air-operated double diaphragm pumps utilize flexible diaphragms to separate the fluid and compressed air supply. The diaphragms are driven by compressed air to minimize mechanical stress and improve their lifespan. The air valve system, which has two outlet and inlet valve balls, opens and closes as fluids pass through the pump. The AODD pump starts the operation when the air distribution system directs the air to the air chamber and the diaphragm. The air is usually directed to the back side of the diaphragm, which moves the diaphragm toward the liquid chamber. In this process, the opposite diaphragm is pulled inward. The atmospheric pressure forces the fluid to reach the inlet manifold. This makes the liquid to flow into the liquid chamber, moving past the inlet valve ball. Once the liquid chamber on one side of the AODD pump reaches capacity, compressed air is redirected to the back of the opposite diaphragm, causing it to pull away while the other is forced towards the liquid chamber. This process closes the intake valve ball and lifts the discharge valve ball off its seat, allowing the liquid to flow through the discharge manifold. The process is then repeated on the opposite side, with each diaphragm going through one discharge and one suction stroke before returning to its original position. Major Components of Air-Operated Double Diaphragm Pumps Diaphragms: The diaphragms are the heart of the air-operated double diaphragm pumps, responsible for the suction and discharge of fluid. They move back and forth to create the pumping action. Diaphragms are crafted from a range of materials, like rubber, Teflon or other elastomers, selected depending on their compatibility, with the liquid being pumped. Usually, pumps have two diaphragms linked by a rod. As air pushes one diaphragm the other is pulled, ensuring a co-ordinated motion. Air Valve: The air valve regulates the flow of compressed air to each diaphragm managing the pumps movement. Two typical types of air valves are the spool valve and pilot [...]